ESL EMULATOR BMW E60 - E84- E87 - E90 1 Series 3 Series 5 Series - Mini Cooper

Steering Lock Emulator BMW

Works in :

BMW E60 - E87 - E90

3 Series

5 Serie

To solve ELV module problems in BMW car.

Remove the 4-pin connector from your ELV unit, plug the connector to the emulator and start the Vehicle.

Works on BMW E60, E87, E90 and similar system

Emulates ELV (steering lock module).

• Plug and Play - no additional programming necessary.

 In some cases must clear CAS error memory and counters with diagnostic tool. If connected correctly then you will hear one beep , (but if there is a problem then you will hear five beep). when CAS is accessing ELV (lock and unlock commands etc).

Requires to remove error codes with diagnostic tool.

Instructions

1. Make sure steering wheel is unlocked and car starts ( if not then reset CAS counter)

2. Remove the 4 wire connector from the steerung wheel column

3. Identufy the location of the number 1 wire from the wiring harness connector or the steering column conector

 4. Plug the connector from your wiring harness (4 wire black connector) into the Emulator so pin 1 from your harness is mated with pin 1 on the emulator.

 5. It’s best to secure the connector so it can’t come loose and make sure it has good contact with your wiring harness – Best to solder in place!