Flat LCD Connector for Siemens info Half Display OPEL GM Vauxhall Cadilac 1998-2003 (Best quality)

Adaptable flat with carbon contacts to replace the connection between the LCD display and the board.
It is used in:

OPEL ASTRA G and VECTRA B Infocenter siemens

OPEL OMEGA B

OPEL ZAFIRA A

(from 1998 to 2003 models).

Info Display from OPEL/GM/Vauxhall 'half', made by Siemens

PARAMETERS:

size: 120 x 50 mm / 4.7 x 2inch (L*W)

Flat Heatseal conector to connect LCD to PCB, Almost always soldering required with special soldering.tool available in our web:

:To install this Ribbon, you must use the T-Tip with at least a 40 Watt Iron. The T-Tip temperature must reach 100 Degrees Celsius; pressure must be applied in order for the Ribbon to heat seal to the board properly

INOVAUTO IS NOT RESPONSIBLE FOR ANY DAMAGE DURING INSTALATION, WARRANTY LIMITED AFTER SOLDERING OPERATION.