LANCAR P.T.F.E. 200ML - Treatment with Polytetrafluoroethylene

1.-DESCRIPTION
Antifriction treatment based on polytetrafluoroethylene (PTFE), containing polar and non-polar particles, forming a stable dispersion in lubricating oils.

2.-CHARACTERISTICS
- Prepared as a concentrate mixture of MP and EP and P.T.F.E additives.
- For use diluted in oils.
- The surface film forming the PTFE dramatically reduces friction.
- Reduces overheating.
- Reduces excessive consumption and noise.
- Extends the life of your machinery or engine.
- Helps the oil to work in better conditions.

- Reduces oil consumption.
- Improves low-speed operation with large loads.
- Increases cylinder compressions.

3.-COMPATIBILITY
- Can be mixed with lubricants formulated with mineral bases
- Compatible with almost all synthetic bases.
- Insoluble in aqueous media.

4.-APPLICATIONS
- Applicable in both gasoline and diesel engines.
- 2-stroke, 4-stroke engines, manual gearboxes, differential units, hydraulics, power steering, gear boxes, greasing guides, bearings, etc.., with the dosage recommended by the manufacturer in mind.
- In 4-stroke engines, apply the hot engine oil and its temperature.

- Do not apply to 2-stroke engines.
- Do not apply to automatic gearboxes.

Never apply to wet clutches or any other type of disc coated in oil.

Shake the container vigorously so that all Teflon is diluted. If there is any Teflon in the bottle, use a little oil then shake again.

5.-DOSE
4-stroke engines .................................................. 3% every three changes of oil or once a year. In the event of oil consumption, apply only 3% each change.
Hydraulics........................................................... 2%.
Manual gearboxes ............................................... 5%.
Gear units............................................................ 5%.
Power steering..................................................... 5%.
Gear boxes, gear units......................................... 5%.
As a rule, in all systems where there is no ignition or explosion ...5%.

6.-INSTRUCTIONS
-  Apply preferably with oil at its working temperature.
- Especially on 4-stroke engines, apply with oil hot and run for 15 minutes immediately after application.
- Vigorously shake the product for your application.
- Due to the amount of Teflon it contains, a stick should be used to stir the bottom of the container.
- Keep container tightly closed.