Utilizamos cookies para mejorar tu experiencia. Para cumplir con la nueva directiva sobre privacidad electrónica, necesitamos el consentimiento para utilizar tus cookies. Aprende más.
A1121 Sensor HALL EPS Component For Fiat Opel
- Comprar 2 por 26,00 € cada uno y ahorra 7%
- Comprar 4 por 24,00 € cada uno y ahorra 14%
Sensor HALL EPS Component For Fiat Opel
Use In:
Fiat Grande Punto
Opel Corsa D
Opel Meriva (angle)
Dimension: 4.3 x 3 x 1.5 (Body)
A1121 - Unipolar Hall Effect Switch
The A1121 is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A hall effect sensor is much smaller, but can handle less current than a reed switch.
The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and open-collector output. An internal bandgap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range.
If a magnetic flux density larger than threshold Bop, DO is turned on (low). The output state is held until a magnetic flux density reversal falls below Brp causing DO to be turned off (high).
Features:
- 3V to 24V DC operation voltage
- Low current consumption
- Temperature compensation
- Wide operating voltage range
- South Pole outpu turn ON
- Open-Collector pre-driver
- 25mA maximum sinking output current
- Reverse polarity protection
Marca | Fiat, Opel |
---|---|
Tipo de pieza | Micro Componentes, Sensores |
Aplicacion | Frenos-ABS, Direccion |
Conexión | 3 Pin |