Flat LCD Connector for ACC Middle BMW E31 and E36 3 series 92-99

BMW OBC Display Ribbon Cable DIY

Adaptable flat with carbon contacts to replace the connection between the LCD display and the board.

Help:

https://e31wiki.org/wiki/Multi-information_display_pixel_repair

- BMW E36 3-Series OBC 318/325/323/328 and M3 (1992-1999)
- With 8 or 11 Buttons On Board Computer
- BMW E31 8-Series MID 840/850 (1989-1999)
- With 18 Buttons On Board Computer
- It will not fit BMW E36 3-Series with 18 buttons OBC

Flat Cable Size: 172*11mm

174tracks
Item Condition: New
Use this Ribbon to repair the Pixels on your OBC yourself! When installed properly you will get all of your pixels back.
This Ribbon is Guaranteed to provide a Bright, Crisp Information Display Readout. All tracks are guaranteed to line up perfectly with the PCB Board. 

FITMENT:E31 - 18 Button OBC 

E36 - 8 & 11 Button OBC Only. Will NOT work on E36 18 Button OBC


Special Instructions:

PARAMETERS:

Flat Heatseal conector to connect LCD to PCB, Almost always soldering required with special soldering.tool available in our web:

:To install this Ribbon, you must use the T-Tip with at least a 40 Watt Iron. The T-Tip temperature must reach 100 Degrees Celsius; pressure must be applied in order for the Ribbon to heat seal to the board properly

INOVAUTO IS NOT RESPONSIBLE FOR ANY DAMAGE DURING INSTALATION, WARRANTY LIMITED AFTER SOLDERING OPERATION.