Flat LCD connector for Range Rover ACC Module HSE P38

 Description:

Flat LCD connector for Range Rover ACC Module

Adaptable FLAT with Carbon connect to replace the connection between the LCD display and the Board.

Features and Specifications:

For Fitment to:

• Valeo JFC102550
• AWR 5051

-           Valeo ACC climate control modules for RANGE ROVER

-          32 PIN

-          up to 2003 model

 PARAMETERS:

Flat Heatseal connector to connect LCD to PCB, Almost always soldering required with special soldering. Tool available in our web:

http://shop.inovauto.com/index.php/maquinas-de-reparac-o/repair-tools/soldering/rqf3532007-d5-1.html

:To install this Ribbon, you must use the T-Tip with at least a 40 Watt Iron. The T-Tip temperature must reach 100 Degrees Celsius; pressure must be applied in order for the Ribbon to heat seal to the board properly

Troubles:

Common dead / fading / disappearing pixels on the instrument cluster (also on the board computer) - on the large LCD display that shows valuable data such as the mileage and the on board computer messages

INOVAUTO IS NOT RESPONSIBLE FOR ANY DAMAGE DURING INSTALATION, WARRANTY LIMITED AFTER SOLDERING OPERATION.